Glossary · Networking

RTT (Round-Trip Time)

Round-trip time is how long a packet takes to travel to a destination and for its reply to return, measured in milliseconds.

Updated October 6, 2026

Round-trip time (RTT) is the time between sending a packet and receiving the response to it from the other end. It combines the travel time in both directions, queueing in routers, and processing at the destination.

Why it matters

RTT is the practical measure of network latency. Many protocols wait for acknowledgments, so RTT limits how fast they can ramp up: a TCP connection setup costs one RTT, and a TLS handshake adds more, which is why distant servers feel slow to start. Light in fiber covers roughly 200 km per millisecond, so physical distance sets a floor: a round trip of about 10,000 km cannot be under 100 ms regardless of bandwidth.

Example

$ ping -c 3 example.com
64 bytes from 203.0.113.10: icmp_seq=1 ttl=57 time=21.4 ms
64 bytes from 203.0.113.10: icmp_seq=2 ttl=57 time=22.1 ms
64 bytes from 203.0.113.10: icmp_seq=3 ttl=57 time=21.0 ms

The time values are RTT samples, about 21 ms here. Variation between samples is jitter.

Common mistakes

  • Equating RTT with one-way delay; half of RTT is only an estimate because paths can be asymmetric.
  • Judging a link by one ping sample instead of several.
  • Assuming a ping reply proves a web service works, since ICMP and HTTP may be handled differently.

Get notified when this term updates

Plus occasional practical tips on uptime and monitoring, nothing else. Unsubscribe anytime.

Keep reading

Glossary · Networking802.1X (Port-Based Network Access Control)802.1X is an IEEE standard that blocks a network port until the connecting device authenticates, commonly with a RADIUS server.Glossary · NetworkingAccess Point (Wireless AP)A wireless access point is a device that connects Wi-Fi clients to a wired network, acting as the bridge between radio and Ethernet.Glossary · NetworkingAnycast RoutingAnycast announces the same IP address from many locations, so network routing sends each user to a nearby site and absorbs traffic floods.

This page is general information written by our editorial team and updated when documentation changes. Servers and providers differ, so test changes safely first. See our editorial policy and disclaimer.